Supero 6012L-6 Operation & User’s Manual

24, 2-8 SUPERSERVER 6012L-6 Manual Figure 2-5. Accessing the Inside of the SuperServer 6012L-6 6. Check all cable connections and airflow: Make sure all power and data cables are properly connected and not blocking the chassis airflow. See Chapter 5 for details on cable connec- tions. Al…

50, 5-16 SUPERSERVER 6012L-6 User’s Manual Sleep Button The header designated J10 (near the BIOS chip) allows you to con- nect a push button to the motherboard that will put the sys- tem in a suspend mode (S1) when depressed. Pin Number 1 2 3 Definition +5V Standby Ground Wake-up Wake-On-LAN Pin Defi…

17, Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 6012L-6 up and running. Following these steps in the order given should enable you to have the system operational withi…

87, Supero 6012L-6 Chapter 7: AMIBIOS 7-17 7-6 PCI PnP Setup Choose PCI/PnP Setup from the AMIBIOS Setup main menu. All PCI/PnP options are described in this section. The PCI/PnP Setup screen is shown below. Hot Spare Row The settings for this option are Enabled and Disabled. When enabled, the amo…

23, Chapter 2: Server Installation 2-7 2-5 Checking the Motherboard Setup After you install the 6012L-6 in the rack, you will need to open the unit to make sure the motherboard is properly installed and all the connections have been made. 1. Accessing the inside of the 6012L-6 (see Fi…