Measuretek PS-102-75 Operation Manual

5, Measuretek PS-102-75 PS‐102 www.measuretek.net . 3 . Calibration Mode Note:  A standard calibration weight of at least 10% of the scale’s rated capacity is required.  The calibration operation must be in pounds.  Press ZERO/ON/OFF at any time to exit calibration mode.  Using 80% t…

6, PS‐102 www.measuretek.net . 4 . User Parameter Setup Mode 1. From normal weighing mode, press UNIT and ZERO/ON/OFF until “USer” is displayed. 2. Within user parameter setup mode:  Press PRINT/HOLD to shift the flashing data entry position from right to left  Press UNIT …

3, PS‐102 www.measuretek.net . 1 . General Information  Read and understand all operating instructions before using this product. Keep this manual for future reference.  Record the weight shortly after loading the platform. After extended periods, the load cell’s output signature may…

10, PS‐102 www.measuretek.net . 8 . Serial Communication (continued) Meaning of Some Symbols: 0 ¯ ¯ ¯ ¯ Zero point is over the setting range 0_ _ _ _ Zero is below the setting range Ad¯ ¯ ¯ Analog digital converter chip over max. range Ad _ _ _ Analog dig…