4RF Aprisa XE Operation & User’s Manual

201, Troubleshooting | 200 Alarm Explanation Synthesizer Status The selected transmit frequency is outside the tuning range of the transmitter synthesizer Modem Lock The terminal modem is not synchronized with the modem at the other end of the link TX Temp Shutdown The transmitter po…

64, Configuring the terminal | 63 Modem Performance Settings Select Local or Remote > Performance > Summary and Quick Links of Modem Performance Settings. There are two Modem Performance Settings, Modem QPSK Coding and Modem Interleaver Mode. Modem QPSK Coding When…

116, Configuring the traffic interfaces | 115 HSS clocking types HSS internal clocking Internal clocking relies on the (highly accurate) terminal system clock, that is, it does not allow for any independent clocks coming in from client equipment. For this mode, all incoming clocks …

184, 4RF Aprisa XE Maintenance | 183 To upload a configuration file: 1. Select Local > Maintenance > Config Files > Upload Configuration 2. Browse to the location of the file required to be uploaded into the terminal *.cfg. 3. Click on Upload. The normal response is Succee…

214, Interface connections | 213 Ethernet interface connections Pin number Pin function Direction TIA-568A wire colour 1 Transmit Output Green/white 2 Transmit Output Green 3 Receive Input Orange/white 4 Not used Blue 5 Not used Blue/white 6 Receive Input Orange…

256, Product end of life | 255 19. Product end of life End-of-life recycling programme (WEEE) The WEEE Directive concerns the recovery, reuse, and recycling of electronic and electrical equipment. Under the Directive, used equipment must be marked, collected separately, and dispo…