ACTi TCM-3011 Hardware User Manual

11, www.acti.com TCM-3011 Hardware User’s Manual 11 Digital Input / Output include the following: •1 transistor output - For connecting external devices such as relays and LEDs. Connected devices can be activated by Output buttons on the Live View page or t…

10, www.acti.com TCM-3011 Hardware User’s Manual 10 Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.) Step 3: Reconnect the power cable while continuing to hold the reset button. The red Power LED light will flash on fo…

13, www.acti.com TCM-3011 Hardware User’s Manual 13 Connect cables through the hole on the ceiling and plate, or on the side of casing Fasten the camera to ceiling by turning clockwise direction …

14, www.acti.com TCM-3011 Hardware User’s Manual 14 Insert the cables (Power/Network/DIO/Audio) through the mounting plate and connect to the camera. Then use the little strap in bundled accessory to fasten the network cable. 1.6.1.6 …

22, ACTi TCM-3011 www.acti.com TCM-3011 Hardware User’s Manual 22 7. After logging in, you will see the video from camera. To go to the main menu, click the ”Setup” button on the top left. If you are using a single camera, this is enough to access the device. …

9, www.acti.com TCM-3011 Hardware User’s Manual 9 Physical description 1) Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local netwo…