AEE SD21 Operation & User’s Manual

13, Parameter Settings To set parameters, perform the following operations: − In the preview mode under power-on state, press the M key to display the menu interface. − Press the < or > key to choose a left or right option from the menu interface. − Press the + or – key to choose…

30, AEE SD21 AV data cable to the ports in the same color on the TV set or monitor. Ensure that the TV set or monitor is properly grounded. 3. Adjust the parameter settings of the monitor to achieve the optimal display effect. …

11, icon is lit with the green indicator on the left side blinking slowly. When the video camera is not connected to a computer, this icon is not displayed. G TF card capacity indication: The (TF card capacity) icon is displayed in the bottom-right corner, indicating the…

9, Use and Installation 1. Installing the SD21 video camera The SD21 video camera can be hand-held or used with hand-free accessories. It can be installed at your desired place or, after being equipped with a waterproof housing, placed in water for shooting underwater sceneries. How to install t…

26, 8. Using a Remote Controller The SD21 video camera is equipped with a remote controller, which is used for control of video recording, shooting as well as turning on/off laser. After you pressing a key, the red indicator on the remote controller blinks once. The following figure shows the …

25,  Delete single: deletes a picture. Press OK to display the options for deletion. Select √or × based on the screen prompts. Select√ to delete a file.  Delete all: deletes all the unprotected pictures. 2) Protecting a File On the video, photo, or video & photo interface, you …