i-Flash P2DS Series Operation & User’s Manual

12, 12 | P a g e Pulse P2DS Series User Manual P2DS Home Web Page 1 Motion Detection If the motion detection alarm is triggered, the indicator will flash red. Click on the indicator to turn off the alarm. 2 Control Console PTZ Console controller. PTZ device needs to be c…

32, 32 | P a g e Pulse P2DS Series User Manual Configure Motion Detection Time Schedule & Alarm Actions This section allows you to configure the time during which the P2DS will monitor the motion detection. The P2DS not only can monitor your settings but also can take actio…

6, 6 | P a g e Pulse P2DS Series User Manual Package Contents Items in the package: • P2DS IP Camera • Quick Installation Guide and Software CD P2DS IP Camera Quick Installation Guide and Software CD …

30, i-Flash P2DS Series 30 | P a g e Pulse P2DS Series User Manual Path – The directory in the FTP server where recorded video will be uploaded. Test FTP Account Settings – Click the Test button to upload a sample file to make sure that FTP is properly configured. PTZ Settings This setting i…

1, 1 | P a g e Pulse P2DS Series User Manual Pulse IP Camera User Manual Model Number: P2DS Series Revision: 3.0.1.2 …

19, 19 | P a g e Pulse P2DS Series User Manual Networking Page – Assign an IP to P2DS P2DS supports IP version 4. The IP address can set automatically via DHCP, or a static IP address can be set manually. To make P2DS work properly, the user needs to set the DNS config…