Ferimex Outdoor Multi-Router 3-2 Installation Manual

7, Ferimex Outdoor Multi-Router 7 Hardware Installation 1. Assemble the mounting bracket (9) and connect it to the back side of plastic housing of the outdoor unit using 4 screws. The holes for screws are on both right and left sides, so you can choose where you connect the hold…

10, Ferimex Outdoor Multi-Router 3-2 Ferimex Outdoor Multi-Router 10 In the same way you can assign IP addresses to other interfaces. See attached Reference manual for more configuration advice. 2. Command Line Interface (CLI) – The build-in CLI can be accessed using telnet or SSH over IP address or using MAC tel…

5, Ferimex Outdoor Multi-Router 5 b) Outdoor Multi-Router 1-1 1. ETH 1 + POE IN 4. WLAN 1 6. PoE OUT (to outdoor device) 7. Power Input 8. Lan IN 9. Mounting bracket (numbers 2,3 and 5 are unused) …

12, Ferimex Outdoor Multi-Router 12 b) Outdoor Multi-Router 1-1 Manufacturer Ferimex IT Purpose multi-function router Software MikroTik RouterOS™ Processor 300MHz MIPS Ethernet LAN 0x 10/100Base-T Wireless port 1x 2,4 Ghz/5Ghz 802.11a+b+g Chipset …

4, Ferimex Outdoor Multi-Router 4 Package does not contain Ethernet cables. You should prepare Ethernet cables by yourself in the lengths you need. Ferimex can sell you Ethernet cables separately. Hardware Description a) Outdoor Multi-Router 3-2 …

9, Ferimex Outdoor Multi-Router 9 Searching MikroTik devices in your network To assign the IP address to the device in the menu click “IP -> Addresses”. Then click “+”, fill IP address to the “Address” field and select the interface to which the address should be…