Fire-Lite MS-9050UDC Operation & User’s Manual

120, Programming 120 MS-9050UD Series PN 52413:D 12/15/08 3.6.9.2.3.1 Ring Count The ring count designates the number of rings allowed on the phone line prior to answering an incoming call from a service terminal. The factory default is 0 which means the control panel will not answer any incom…

211, MS-9050UD Series PN 52413:D 12/15/08 211 Index Software Zones 12, 183 sounder 15 Specifications 13 strobe synchronization 13 Style 12 Style Y 44 NC configuration 45 Style Z 44 NAC configuration 45 subscreen 53 Sup…

131, Programming MS-9050UD Series PN 52413:D 12/15/08 131 Ademco Contact ID Format The information shown in Table 3.5 is automatically programmed for the Central Station phone number Event Codes when Ademco Contact ID Format is selected. Enter 000 for an Event Code Setting to disable the report.…

87, Programming MS-9050UD Series PN 52413:D 12/15/08 87 The Zones Installed screen will show the system zones (default and user programmed) and their associated types. Note that an up and/or down arrow will appear in the upper right corner of the display, indicating that additional screens of…

174, Fire-Lite MS-9050UDC Central Station Communications 174 MS-9050UD Series PN 52413:D 12/15/08 5.1 Transmittal Priorities The integral communicator transmits highest priority events first. Events, in terms of priority, are listed below in descending order: 1. Alarms (highest priority level)  …

52, Programming 52 MS-9050UD Series PN 52413:D 12/15/08 3.2 User Programming The MS-9050UD is completely field programmable and requires no special software skills. While programming the MS-9050UD, the fire protection capabilities of the control panel are enabled. Site-specific programming may…