Jetcom CCTV SS-HDR-8704 Operation & User’s Manual

38, data of image point. Select the item which need modify by pressing SPOT key in the remote control or clicking the item directly with the mouse.Then change the data by pressing / SEQ in the remote control or left/ right click with mouse. Preset operations (include set and view) (1) Select image p…

37, Please check the following table for the symbol of these icons: Preset key. Direction icon. Control the camera to turn up, down, left, and right. Preview preset key. Modify the parameter: Network Digital Video Recorder …

30, 3.10 Disk management Note: You'd better format the hard disk before the first recording to protect the record video file. DISK A 074 099 000 SAVESAVE EXITEXIT FORMATFORMAT FORMATFORMAT Network Digital Video Recorder …

9, Chapter II Operation Instructions 2.1 Description of front panel Description NameNo. Network Digital Video Recorder Operation Manual ( V1.0 ) 8 1 Number keys a) input numbers. b) keystroke…

29, Jetcom CCTV SS-HDR-8704 3.9 Alarm setup Network Digital Video Recorder Operation Manual ( V1.0 ) There are two ways for alarm output, Buzzer and Relay. They include three alarm modes: (1) Video loss alarm(Loss); (2) …

26, 3.6 Motion alarm (1) Camera: used to select the channel to be set. (2) Sensitivity: low / high optional from "1-10". The bigger number, the higher sensitivity. (3) Detect area setup: drag the mouse to set the detection area as light blue square. When motion occurs, the area …