Dankoff Solar Products SunCentric P Instruction Manual

23, 5.2 Interface with Pool Cleaners and Pool Sweeps CAUTION A solar pump may not be able to operate certain types of automatic pool cleaners, pool sweeps, or vacuum cleaners. Some of these devices depend on the pool’s filter pump to supply the necessary suction or pressure. T…

5, Dankoff Solar Products SunCentric P 3.2 Solar Array Mounting Rack WARNING All parts of your mounting structure must be engineered for wind resistance, ease of adjustment, and safety. Follow the rack manufacturer’s instructions that are packed with your rack. WARNING Use extreme caution when assembling the array above you…

7, 3.5 Setting the Solar Array Tilt Angle Some solar array racks are adjustable to a desired angle, to accommodate both the location and the season. We offer these choices for seasonal management. 1. YEAR-ROUND COMPROMISE (no seasonal adjustment) Set the angle equal to the latitude …

28, 8.2 Controller and Junction Box Maintenance Controller and junction box The controller is electronic with no moving or wearing parts. It requires no maintenance. There are rubber gasket seals at the top and bottom, and rubber plugs to seal unused conduit holes. Inspect them to …

26, 7 OPERATING THE PUMP This explains the function of the switch and the indicator lights on the pump controller. SWITCH   POWER ON/OFF (PUSH ON / PUSH OFF) When switched off/on, it resets all system logic. INDICATOR LIGHTS   SYSTEM (green) The controll…

22, 5 SWIMMING POOL SYSTEMS 5.1 The Need for Low-Friction Piping and Filtration CAUTION A low-friction piping and filtration system is essential to satisfactory solar pump performance. In a retrofit situation, be prepared to replace some components where appropriate. Plan the pump installation w…