Dante DNA2000 Series Installation And Operation Manual

20, 2.4.2 PC-end to the device-end Device Connection Connect the speaker or the pickup to the audio output port in the PC and then connect the earphone or the sound box to the first audio input port in the device rear panel. Login the Web and then enable the corresponding chann…

128, Parameter Function Snapshot type There are two modes: Regular (schedule) and Trigger.  Regular snapshot is valid during the specified period user set.  Trigger snapshot only is valid when motion detect alarm, tampering alarm or local activation alarm occurs. …

135, Dante DNA2000 Series 7.9.2.5 3G 7.9.2.5.1 CDMA/GPRS The CDMA/GPRS interface is shown as in Figure 7-38. Figure 7-38 Please refer to the following sheet for detailed information. Parameter Function WLAN type Here user can select 3G network type to distinguish the 3G module from dif…

46, In the main menu, from Setting to Schedule, user can go to schedule menu. See Figure 5-36.  Channel: Please select the channel number first. User can select “all” if user wants to set for the whole channels.  Week day: There are eight options: ranges from Saturday t…

114,  2: Local record. When user click local record button, the system begins recording and this button becomes highlighted. User can go to system folder RecordDownload to view the recorded file.  3: Snapshot picture. User can snapshoot important video. All images are memori…

68, Figure 5-61 Please highlight icon to select the corresponding function. After setting all the setups please click save button, system goes back to the previous menu. 5.9.4 Abnormality Abnormality interface is shown as in Figure 5-62.  Event type: There …