Flyzone Piper J-3 CUB Operation & User’s Manual

5, 5 ❏ 3. Pull the battery holder out of the transmitter case and install eight new “AA” batteries, following the diagram on the holder. ❏ 4. Insert the battery holder in the transmitter case so that the two contacts on the battery holder align with the contacts in the transm…

15, 15 OTHER ITEMS AVAILABLE Don’t just learn to fl y: learn to fl y a ducted fan model — without fear! The Diablo’s sleek military styling gives it the look of a super-quick jet...but it actually handles as gently as a trainer. It’s virtually fl ight-ready right out of the box, wi…

13, 13 the control surface responds. Also, turn the motor on and check the range. If you still have control of the airplane, it is safe to extend the transmitter antenna and fl y the airplane. If you do not have control of the plane, make sure the batteries in the transmitter are fre…

2, Flyzone Piper J-3 CUB 2 PROTECT YOUR MODEL, YOURSELF AND OTHERS; FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS Your Piper J-3 Cub plane is not a toy, but rather a sophisticated, working model that functions very much like an actual airplane. Because of its realistic performance, the model, if not assembled and…

3, AIRFRAME PARTS AND HARDWARE 3 UNPACKING THE BOX Check the parts against the list below. If any parts are damaged or missing, give us a call at: (217) 398-8970. Part Name ................................................Qty. ❏ 1. Fuselage.....................................................…

11, 11 ❏ 2. Place marks on the bottom of the wing 1-1/2” [38mm] and 1-3/4” [44mm] back from the front of the wing, next to the left and right sides of the fuselage. Turn the airplane right side up. Try to balance the airplane on your fi nger tips, between the marks. This is w…