Ikebana IEEE 1394 External DVD-R/RW Drive Quick Start Installation Manual

6, 6 IEEE 1394 (FireWire) External DVD-R/RW Installation If your computer has no built-in IEEE 1394 (FireWire) port, you will first need to install an IEEE 1394 (FireWire) PCI card. Please refer to IEEE 1394 (FireWire) PCI card Installation. You need to connect your new Ikebana™ IEEE …

2, 2 Package Contents The Ikebana™ IEEE 1394 External DVD-R/RW Kit includes the components shown here. Please familiarize yourself with each of these items prior to installation.  IEEE 1394 (FireWire) External DVD-R/RW Drive  External Power Supply  IEEE 1394 (Fire…

5, 5 3. Select “CD-ROM driver” (or “Specify a location”, if you know where the driver is located). Then insert the Windows 98 Second Edition (or Windows ME/2000/XP) CD-ROM into the computer and click “Next”. 4. Once the wizard has found the location of …

3, 3 3. Ground yourself by touching your computer’s chassis or power supply unit to drain any static that built up inside your body. NOTE: You can permanently damage equipment if you touch it while there is any static charge in your body. 4. Locate an available slot f…

4, 4 6. Attach the outer casing of the computer and any screws that were removed. Then reconnect your monitor, mouse, keyboard and the computer to the electrical outlet. IEEE 1394 (FireWire) Driver Installation Please follow these simple procedures to complete the d…

10, Ikebana IEEE 1394 External DVD-R/RW Drive 10 2. Read the license agreement and the click “Yes” if you agree. 3. The User Registration screen appears. Input your name and corporation name. Software installation will not continue without inputting required information. Input the 18-digit serial number included in the Ike…