Formula Sound FF - 6000 Operation & User’s Manual

5, PH/LINE LINE GAIN CLIP 3 X-FADE A B CUE HF MID BASS INPUT CHANNELS 3 to 6 Input Sources. These channels have a stereo RIAA phono stage and a normal stereo line input both on twin gold plated RCA phono connectors. The phono stage may be configured as a second line input by depressing a conce…

2, FF - 6000 INTRODUCTION The features and layout of the FF-6000 were determined in collaboration with leading loudspeaker manufacturers Funktion One, who canvassed many DJs world wide on their requirements. The result is a mixer which is not only of the highest sound quality, as you w…

9, Formula Sound FF - 6000 Formula Sound reserve the right to alter specifications at any time without notice. All Formula Sound products are designed and manufactured in our own factory which enables us to maintain strict quality at every stage of manufacture. This attention to detail has helped to win us 1…

8, Operational Information or how to get the best out of your mixer Gain In an audio mixer different signal levels from various items of equipment need to be amplified or attenuated to a common level so that they can be added or mixed together. These signal levels may differ considerably dependin…

10, FF- 6000 Specifications Frequency response E.Q. set flat 20Hz - 20kHz +/-0.5dB Maximum output level Main output Zone output and Booth monitors output active balanced. +22dBu Distortion any input < 0.01% typically <0.005% Noise measured 20Hz-20kHz Stereo inputs e.q. fla…

7, Master section continued BOOTH MONITORS - This control adjusts the level of the booth monitors output which is a mix of channels 1 to 6 only (console microphone not present in either output). The balanced outputs are via 3 pin XLR connectors. A mono signal may be obtained by using…