Element Labs Kelvin BRICK Operation & User’s Manual

24, Kelvin™ BRICK User’s Guide A-6 Appendix A DMX Protocol Film & Video Mode Channel 9 - Strobe Duration default=off (0% / 000) percent decimal duration 0% 000 off NOTE Duration = 100% will appear the same as Strobe “off” (i.e. fixture may have intensity but will not be fla…

27, Kelvin™ BRICK User’s Guide A-9 Appendix A DMX Protocol RGB Mode Channel 10 - Strobe Rate default=0.25Hz (0% / 000) Strobe Rate step = 0.25Hz percent decimal rate (Hz 1 ) rate (seconds per cycle) 0% 000 Frequency = 0.25Hz ↓↓↓ 100% 255 Frequency = 64Hz (sample settings) .4 001 .5 …

16, Kelvin™ BRICK User’s Guide 3-7 Chapter 3 IR Remote Control F5 (not implemented yet) F6 (not implemented yet) CCT Presets/Color Mode • In CCT mode, these buttons select one of the 6 preset Correlated Color Temperature values. • In color mode, these buttons toggle on/off all…

14, Kelvin™ BRICK User’s Guide 3-5 Chapter 3 IR Remote Control Chromaticity (x,y) Adjustment The middle, 4-way button allows control of the x and y chromaticity values. • Left decreases the x chromaticity value. • Right increases the x chromaticity value. • Down decreases t…

10, Kelvin™ BRICK User’s Guide 3-1 C HAPTER 3 Chapter 3 IR R EMOTE C ONTROL General Info The handheld infrared (IR) remote allows you to control many features of the Kelvin™ BRICK. Each of the button groups outlined below are detailed later in this chapter. Figure 3.1 IR Remote C…