Ceragon FA4800 Operation & User’s Manual

73, Default FA4800 Settings Chapter 4 FA4800 User Manual Release 1.9.30 4-11 Default FA4800 Settings The default settings of the FA4800 configuration parameters are listed in the second column of Table 4-4 below. The third column shows the values we use in this manual for illustra…

92, Installation Chapter 5 FA4800 User Manual Release 1.9.30 5-19 Figure 5-22: Main window of the Manager after installation with loaded trunks ¾ To verify the installation: • Verify that the Received Signal Strength (RSS) is according to expected results as determined by the Link Budget Ca…

121, Changing the Link Password Chapter 8 FA4800 User Manual Release 1.9.30 8-10 Changing the Link Password This item is only available when the link is down. Otherwise, it works the same way as the corresponding item on page 5-8. FibeAir2000 Manager Community Strings The ODU communicates with the Fi…

206, Port Functionality Chapter 14 FA4800 User Manual Release 1.9.30 14-3 Each port can be configured how to handle Ethernet frames at the ingress direction (where frames enter the IDU) and at the egress direction (where frame exit the IDU). The configuration is independent at each port. …

122, Link Lock Security Feature Chapter 8 FA4800 User Manual Release 1.9.30 8-11 Figure 8-9: Changing the Community String Forgotten Community string If the read-write Community string is unknown, an alternative Community key can be used. The alternative Community key is unique per ODU an…

76, Ceragon FA4800 Installation Chapter 5 FA4800 User Manual Release 1.9.30 5-3 Installation Step 1, Start the Wizard In the tool bar of the FibeAir2000 Manager main window, click the Link Installation button. The Link Installation button is only accessible if the antennas are properly aligned. If thi…