ChamSys MagicQ MQ100 Pro Quick Start Manual

21, www.chamsys.co.uk MagicQ Console Quick Start Manual 21 of 34 Locating Heads The first action you are likely to want to do is to locate the heads – i.e. to put them into a starting position. Select the required heads and then press the LOCATE button. Locating a head brings all the attributes f…

22, ChamSys MagicQ MQ100 Pro www.chamsys.co.uk MagicQ Console Quick Start Manual 22 of 34 For indexed attributes such as colour wheels and gobo wheels, the button associated with each encoder can be used to bump the attribute value to the next range. Pressing SHIFT and the button bumps back to the previous ra…

24, www.chamsys.co.uk MagicQ Console Quick Start Manual 24 of 34 So, for example to record a stack of two looks, the first yellow dots, the second blue triangles: • Generate the yellow dots look. • Press RECORD and press the SELECT button of the playback. • Generate the blue t…

26, www.chamsys.co.uk MagicQ Console Quick Start Manual 26 of 34 Hints for Operators used to other consoles Users familiar with Hog II consoles Choose “Hog II Warp Mode” or “Theatre Tracking Mode” Feature MagicQ Hog II Universes 18 4 (7 in overdrive) Channels 9216 2048 (3584 in overdrive) Altern…

4, www.chamsys.co.uk MagicQ Console Quick Start Manual 4 of 34 Connections The picture below shows the connections on a MQ100 Pro console. The MQ200 Pro and MQ300 Pro have the same connectors with the addition of extra console lamp sockets. The expansion module slots can be fitted with…

29, www.chamsys.co.uk MagicQ Console Quick Start Manual 29 of 34 Troubleshooting No outputs Check whether the desk is operating correctly by opening the Outputs Window and looking at the channel data. If channels are not at their correct levels then check: • Are the Grand Master and Playback Maste…