Heatilator GBST36 Series Owner's Manual

32, 32 Heatilator • Caliber Multi-Sided B-Vent • 4002-094 Rev H • 11/07 With proper installation, operation and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualifi ed service person in th…

39, Heatilator • Caliber Multi-Sided B-Vent • 4002-094 Rev H • 11/07 39 40 in. (1016 mm) 24 in. (610 mm) 36 in. (914 mm) 1 in. (25 mm) 3 in. (76 mm) 3 in. (76 mm) 6 in. (152 mm) 34-1/4 in. (870 mm) 40-5/8 in. (1032 mm) Alternate Electrical & Gas Line Access Electrical Access Gas…

23, Heatilator GBST36 Series Heatilator • Caliber Multi-Sided B-Vent • 4002-094 Rev H • 11/07 23 E. Install the Junction Box • Remove the junction box assembly from the valve compartment. • If the box is being wired from the OUTSIDE of the appliance: - Loosen two screws on the Romex connector, fee…

4, 4 Heatilator • Caliber Multi-Sided B-Vent • 4002-094 Rev H • 11/07 1 1 Listing and Code Approvals A. Appliance Certifi cation This product is listed to ANSI standards for “Vented Gas Fireplaces” and “Gas Fired Appliances for Use at High Altitudes”. This model (natural…

30, 30 Heatilator • Caliber Multi-Sided B-Vent • 4002-094 Rev H • 11/07 Standing Pilot Ignition A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly. B. BEFORE LIGHTING smell all around the appliance area for…

22, 22 Heatilator • Caliber Multi-Sided B-Vent • 4002-094 Rev H • 11/07 D. Standing Pilot Ignition System Wiring • This standing pilot ignition system wiring does not require a 110 VAC supply to operate. See Figure 10.3 for the wiring diagram. • It is recommended that a 110 VAC…