Vax Mach3 U90-M3 series Instruction Manual

10, vax.co.uk 10 maintenance Grasp brushbar firmly and fit it into position by first sliding end opposite the belt into the rectangular slot (A) on side of cleaner. Pull other side of brushbar (B) into place (Fig.6/7). Turn brushbar making sure belt turns freely and is not pinched between brushbar a…

13, 13 clearing blockages / troubleshooting Reposition tube on back of cleaner, replace 5 screws. Checking Under Hood Turn cleaner OFF and unplug. Remove hood, belt and brushbar as described in previous section. Look into opening (A) for blockages and remove (Fig.7/4). Replace belt, brush…

3, Vax Mach3 U90-M3 series 3 safety information Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 2. Safety Information For Household Use Only When using the vacuum cleaner, basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. Do not handle th…

8, vax.co.uk 8 dirt container and filters Remove dirt container as described above. Twist filter assembly counterclockwise. Remove assembly from dirt container (Fig.5/6). Dirt and debris can be cleaned from the filter assembly by brushing with the cleaner’s combination tool. Place the…

4, vax.co.uk 4 assembly 3. How to assemble Attach Handle Grasp orange tie wrap and pull until the black plug comes out of the handle cavity (Fig.3/1). Hold plug with one hand; upper handle with the other hand. Push plug into upper handle, aligning with opposite end of plug and push firmly until you hea…

1, vax.co.uk Please read carefully before using this cleaner. Always fully extend the mains cable before use. Retain for future reference. instruction manual Bagless upright Vax model number: U90-M3 series U90-M4 series Version 1.4 Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 WARNING…