Walker Bay 275R Assembly Instructions Manual

7, CAUTION ! For large tears or repairs to seams or bulkheads it is recommended that the tube be returned to Walker Bay® or your dealer for repair by a trained professional. Contact Walker Bay® customer service for return authorization, Repair Service and Freight Rates. TUBE REPAIRS For re…

2,           ! $ & ! % & " Bow Section Aft Section Fasten nut tightly 4%-0,!4% 4%-0,!4% Tools you will need: Remove paper template. Drill with bit #11 Screwdriver RETROFIT RID TRACK ASSEMBLY INSTRUCTIONS FOR NON RID READY BOATS Cut out template on…

5, Walker Bay 275R Using wrench provided in repair kit, hand tighten each valve. DO NOT OVERTIGHTEN VALVE. Inflate chambers in sequence shown until wrinkles disappear. -!8 03) BAR Peel backing from capacity plate and apply new plate on inside of the stern, ov…

3,     ! On assembled boat, locate RID plugs along each side of the hull. Gently tap RID plugs out with a hammer. Once RID plugs are dislodged, carefully pry plugs out with claw of hammer To secure track to hull, insert bolt and washer from inside of hull and nut from o…