Ward Electronics IIM 1000A Operation & User’s Manual

13, Ward Electronics IIM 1000A Figure 5 Note that the administration menu is divided into three sections. The Interfaces section deals with physical connectivity, managing the connection and subtended devices. Services are applications that are within the router core to modify the behavior of a specific interface o…

24, 4.3 Services 4.3.1 Password Administration Used to change passwords and create users. Be sure to record this information in a secure location. Figure 9 4.3.2 Routing and Forwarding Services The Routing and Forwarding Services screen provides two separate…

3, Preface Welcome to the IIM Series 1000A Cellular Router User’s Guide. The User’s Guide will explain the basic operation of a Cellular Router and take you through the necessary settings to get your wireless application online. Additional information and applicable technical notices …

19, 192.168.1.10. Enable Server - This Cellular Router must be assigned a private static IP address, as defined in the next section. It is recommended that an address of 192.168.1.10 be used. The DHCP server will issue dynamic IP addresses to other devices connected to the LAN side. IP addresses…

16, to those Cellular (800MHz) defined as Home in the PRL. Warning – If the Series 4100 Cellular Router is transported from one location to another Network Selection choices other than Auto could cause the unit to fail to make a network connection. For instance, if the Network Selection mode …

10, 3 Start Up Warning – You must connect an antenna to the SMA style antenna connector on the Cellular Router before turning it on. Failure to do this could result in erratic start up behavior and could possibly damage the unit. 3.1 Power Before starting connec…