Vermont Castings DSR36 Installation Manual

12, 12 VCG Designer Series • DSR36 Installation Manual • 4012-130 • Rev A • 02/20/15 D. Frame the Fireplace NOTICE: Hearth extension design must be determined before installation of replace. If the replace is placed on the oor the maximum height of a nished …

1, Vermont Castings DSR36 1 VCG Designer Series • DSR36 Installation Manual • 4012-130 • Rev A • 02/20/15 Installation and service of this replace should be performed by qualied personnel. Vermont Cast- ings Group recommends NFI certied profession- als, or technicians supervised by an NFI certied pr…

31, 31 VCG Designer Series • DSR36 Installation Manual • 4012-130 • Rev A • 02/20/15 C. Non-Combustible Sealant Material After completing the framing and applying the facing materials over the framing, a bead of noncombustible sealant must be used to close off any gaps at the…

17, 17 VCG Designer Series • DSR36 Installation Manual • 4012-130 • Rev A • 02/20/15 Slanted Roofs Flat Roofs Chimney must extend 3 ft (.9 m) above the roof Chimney must extend 2 ft (.6 m) above any portion of the roof or adjacent structures within 10 ft (3 m) of the chimney Chimney …

6, 6 VCG Designer Series • DSR36 Installation Manual • 4012-130 • Rev A • 02/20/15 1/2 in. (13 mm) all configurations 52 in. (1321 mm) 36 in. (914 mm) 16 in. (406 mm) (hearth extension) 48 in. (1219 mm) 12 in. (305 mm) min. to perpendicular wall. Figure 2.2 Fireplace Locatio…