versa VX-AP450N Operation & User’s Manual

1, versa VX-AP450N 1 VX-AP450N 802.11n Wireless High Power Ceiling Access Point Revision 1.0 User Manual 2010-11-24 …

20, 20 Setting Explanation  WPA Algorithm: There are TKIP (Temporal Key Integrity Protocol), AES (Advanced Encryption Standard) and TKIP&AES. The default is TKIP mode.  Key (Pass Phrase): Enter the encrypted characters with 8-63 ASCII characters.  Key Renewa…

26, 26 4.4 Access Control To secure your wireless LAN, the wireless access control is actually based on the MAC address management. Select Wireless Settings -> Access Control to display the following page: Setting Explanation  MAC Address Filter: Enable …

28, 28 Chapter 5 SNMP Configuration 5.1 SNMP Introduction Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is widely used in local area networks (LAN) for collecting information, and managing and monitoring, network devices, …

18, 18 When you select Allow wireless client to access, the ceiling AP can also be used as Wireless Access Point to allow the access of wireless client even when it works in bridge mode. There two parts of basic settings: one is the basic setting in AP mode (See 4.1.1.2); and anothe…

12, 12 Chapter 4 Wireless Settings This chapter introduces you wireless settings in two working modes: Access Point (AP) and Bridge (WDS), including basic settings, security settings, advanced settings, access control, and connection status. 4.1 Basic Settings Access Point (A…