Weslo PURSUIT 103 WLEVEX19830 Operation & User’s Manual

4, 134 ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable spanner …

7, 3. Measure your heart rate, if desired. To measure your heart rate, stop pedaling and place your thumb on the pulse sen- sor as shown. Do not press too hard, or the cir- culation in your thumb will be restricted and your pulse will not be detected. After a few sec- onds, the heart- shaped ind…

8, 98 HOW TO OPERATE THE EXERCISE CYCLE HOW TO ADJUST THE SEAT POST For effective exer- cise, the seat should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowest position. To adjust the height of the seat, first turn the in…

5, Weslo PURSUIT 103 WLEVEX19830 512 3 55 57 55 19 45 56 56 55 57 56 1 13 Zip Tie 36 43 3. Whilst another person holds the Upright (13) in the position shown, connect the Upper Wire (36) to the Reed Switch Wire (43). Cut and remove the zip tie holding the Reed Switch Wire to the Frame (1). Next, connect the Resistance Cable…

6, 116 7 6. Hold the Console (16) near the Upright (13). Connect the console wire to the Upper Wire (36). Next, connect the ground wire to the Upright with the Ground Screw (27). Insert the excess console wire and Upper Wire (36) down into the Upright (13). Next, move the Console (16) toward the Up…