Vive Comfort TP-N-851 Installation Manual

1, 4 5-6 7-10 11 12 Installation Tips Thermostat Quick Reference Subbase Installation Wiring Technician Setup Mounting and Battery Installation Specications 2 3 Thermostat Applications Guide Table of Contents Page Description Gas or Oil Heat Electric Furnace Heat Pump (No Aux. or Emergency H…

12, SPECIFICATIONS 12 The display range of temperature The control range of temperature Load rating Display accuracy Swing (cycle rate or dierential) Power source Operating ambient Operating humidity Dimensions of thermostat 41ºF to 95ºF (5ºC to 35ºC) 44ºF to 90ºF (7ºC to 32º…

8, TECH SETUP STEPS CONTINUED ON THE NEXT PAGE 8 Heating Temperature Setpoint Limit This feature allows you to set a maximum heat setpoint value. The setpoint tempera- ture cannot be raised above this value. Use the or key to select the maximum heat setpoint. 90 ºF LCD Will…

10, 10 TECHNICIAN SETUP MENU Satisfy Setpoint This feature allows the thermostat to keep multiple stages of heat or cool energized until setpoint is satised. Use the or key to turn on or o. OFF Staging Delay OFF This feature allows a delay to occur when a second and t…

2, Installation Tip Wall Locations The thermostat should be installed approximately 4 to 5 feet above the oor. Select an area with average temperature and good air circulation. Do not install thermostat in locations: • Close to hot or cold air ducts • That are in direct sunlight • With an …

3, Vive Comfort TP-N-851 Use the “+” or “-” keys to select your desired room temperature. A copy of the Operating Manual can be downloaded at www.pro1iaq.com Fan System 3 Important: 2 Fan Switch 3 System Switch 4 Temperature Setpoint Buttons 5 Menu Button Access Door 6 Glow in the Dark Light But…