Xante ColourLaser 21 Series Setup Manual

5, 5 3 Check Components 4 Record the Serial Number Before proceeding, locate the silver ratings plate on the back of the printer. Record the serial number you find there at the back of the Handy Reference Guide. You’ll need this number to register your printer and to take advantage of XANTÉ’…

21, Xante ColourLaser 21 Series 21 16 USB Install: Macintosh (cont.) Activate the Duplex Unit and Internal Hard Drive in the Printer Driver If you have the XANTÉ ColourLaser 21D or the XANTÉ ColourLaser 21HC, you must activate the duplex unit and hard disk drive in the drivers before using them. ! These procedu…

10, 10 Network Connection ! No Ethernet ® cable is supplied with the printer. Use an Ethernet cable with two twisted wire pairs and an RJ45 plug. = Test Button = Status Light Turn the printer off. Connect your Ethernet cable to the network port on the print server (3). Connect t…

26, 26 Changing Media Settings for Tray1 in the Printer Menu Transparencies Only: Set Media Type Press MENU repeatedly until MEDIA MENU appears on the display. Press ITEM repeatedly until TRAY1 MEDIATYPE appears on the display. Press VALUE (+ or -) repeatedly until TRANSPARENCY appears on the…

27, 27 19 Check the Printer Settings Power Save Mode The printer is set at the factory to enter the Power Save mode after 1 hour. You can change this setting to 5, 15, 30 or 240 minutes. To change the interval: Press MENU repeatedly until SYSTEM CONFIG MENU appears on the display. Press…

11, 11 12 Network Install: Windows (cont.) Clients with Windows Me & Windows 98/95: Pull Installation Copy the driver files from the XANTÉ ColourLaser 21 CD (\Drivers\Win9x\English\Pcldrv or Psdrv) to a shared network directory of your choice. On the client computer, click Start Settings…