Whistler WS1080 Operation & User’s Manual

66, 66 Frequency Coverage 25.000-26.960 MHz....................................(in 10 kHz steps/AM) 26.965-27.405 MHz....................................(in 10 kHz steps/AM) 27.410-29.505 MHz.......................................(in 5 kHz steps/AM) 29.510-29.700 MHz.....................…

69, Whistler WS1080 69 Service Out-of-Warranty Units will be repaired at “out-of-warranty” service rates when: • The unit’s original warranty has expired. • A dated proof of purchase is not supplied. • The unit has been returned without its serial number. • The unit has been misused, …

8, 8 Setup Antenna To connect the included antenna: 1. Align the slots around the antenna’s connector with the tabs on the antenna jack. 2. Press the antenna down over the jack and turn the antenna’s base clockwise until it locks into place.…

55, 55 To activate Weather Priority: 1. Press to begin scanning for weather frequencies. When scanner stops on the strongest NOAA channel, press MENU. 2. Select Priority and press  or  to select the channel. Be aware that normal scanner audio will be …

39, 39 On Solid - Single Color These settings will illuminate the LED with a single color, solid, no flashing when the Object is receiving traffic. Flash Pattern n/a On Time n/a Off Time n/a LED Enable Checked LED Flash Unchecked Color Count 1 Color 1 FF0000 (re…

38, 38 Alert LED Settings Note: The EZ Scan PC application allows you to group objects (such as all Keller Fire Department) and edit the color to red. Even add an alert tone to differentiate Keller Fire from Hurst Fire. The following instructions show you how to edit color of an individual objec…