Xenta X-Force 1H Instruction Manual

7, Xenta X-Force 1H 3-CHANNEL / 5.1 SOUND CARDS 1. Locate the 3 pieces of signal cable with RCA-stereo jack. 2. Insert the RCA jack with the AC/3 input outlet on the subwoofer. 3. Connect another end of the signal cable with the audio devices output. 4. Select “AC-3” input on the remote control when …

4, CONNECTING WARNING: Do not insert the speaker systems plug in to an outlet until all connections are made. Also, turn off audio source before connecting the outputs to this systems inputs. To ensure first-time operation as expected, carefully follow the connection sequences de…

12, TOTAL RMS POWER 80W SUBWOOFER 30W RMS into 4ohms at 100Hz at 10% THD (Total Harmonic Distortion) SATELLITES 50W RMS into 4ohms at 1kHz at 10% THD (Total Harmonic Distortion) TOTAL PEAK POWER 160W at < 10% THD SYSTEM THD Better than 0.05% THD before clip…

3, BOX CONTENTS PLACING SPEAKERS  X5 Satellites  X1 Subwoofer  X3 RCA-Stereo Signal Line  X1 Manual SUBWOOFER All stereo-encoded information is heard through the satellite speakers. The subwoofer contains no stereo imaging, and its sound is non-direc…

6, 2-CHANNEL / STEREO SOUND CARDS 1. Locate a signal cable with an STEREO-RCA jack. 2. Insert the RCA jack with the input outlet on the subwoofer. 3. Connect another end of the signal cable with the audio devices output. 4. Select “AUX” input on the remote control when…

2, IMPORTANT SAFETY INFORMATION  Read these instructions carefully.  Keep these instructions safe for later use.  Unplug the speakers from the computer and from the electrical outlet before cleaning them with a dry cloth.  Install in accordance with the manufac…