Xpelair DX100B Installation And Maintenance Instructions Manual

11, Part No: 26097AA (Revision A) Head Offi ce, UK Sales Offi ce and Spares Redring Xpelair Group Ltd, Newcombe House, Newcombe Way, Orton Southgate, Peterborough, PE2 6SE England Telephone: +44 (0) 844 372 7761 www.xpelair.co.uk www.xpelair.co.uk/international FM02118 ISO 9001: 2000 …

3, This appliance is intended for connection to xed wiring. Check that the electrical rating shown on each fan matches the mains supply. THE APPLIANCE IS DOUBLE INSULATED AND DOES NOT REQUIRE AN EARTH CONNECTION. All installations must be supervised by a qualied electrician. Installatio…

9, English Using the fan DX100BR / DX100BS Only • Operate the fan using the on/o switch (not supplied). Repeat to switch o. DX100BTR / DX100BTS Only • Operate the fan using an on/o switch (not supplied). Note – the fan may take up to 10 seconds to turn on once the s…

4, Overall Dimensions (mm) Back plate fixing positions A Front Cover Removal B DEPRESS COVER LATCH WITH TOOL & REMOVE COVER COMPLETE English IMPORTANT – PLEASE READ Adjusting the humidity setting Adjusting the run on timer setting Fan switches on at lower level of condensation (anti-cloc…

8, Xpelair DX100B Wire the electrical connections. 11. Make sure the mains supply is isolated. Switch o the mains electrical supply and remove fuses. 12. Feed the cable to the terminal block. Wire the fan as shown in Figure E using the diagram appropriate to the fan model. 13. Connect the cable from the…