XVision XSD10Z-2 Manual 

4, 4 3. Installation 3.1 CONTENTS z XSD10Z-2 Dome z Installation Bracket z 2.5mm Flat Head Screw Driver 3.2 INSTALLATION 1. Dismantle the lower cover components of the transparent dome cover with Allun Key 2. Drill holes in the ceiling according to the mounting hole position and install the plas…

17, 17 7.5 PRESET SETUP Use this menu to setup the general functions of zoom camera module. Preset Number: [1~128] If a selected preset is already defined, the camera will move to predefined position and preset characteristics such as Label and Relay Outputs will show on the display monitor. …

21, XVision XSD10Z-2 21 7.9 INITIALIZE SYSTEM Clear All Data: Deletes all configuration data such as Display, Camera, Motion setup and so on. Clear Display Set: Initializes Display Configuration Clear Camera Set: Initializes Camera Configuration Clear Motion Set: Initializes Motion Config…

20, 20 7.8 GROUP SETUP Group Number: [1~8] Select Group number to edit. If a selected Group number is not defined, ‘UNDEFINED’ will be displayed under the selected pattern number. Clear Group: [CANCEL/OK] Deletes data in current Group Edit Group: Allows the selected Group to be edited. 7.8.1 E…

1, Model: XSD10Z-2 True Day/Night 550/600 TVL Vandal Resistant Mini Speed Dome CCTV Camera with 10x Optical Zoom Model: XSD10Z-2 True Day/Night 550/600 TVL Vandal Resistant Mini Speed Dome CCTV Camera with 10x Optical Zoom This equipment generates, uses, and can radiate radio frequency energy and,…