Xytronic LF-855D Operating Manual

16, Xytronic LF-855D 15 (See Fig.2 below ) 1. Pull the default heater off and replace a new one then re-assembly the heater according the backward procedure. (See Fig.3) SPARE PART Part …

2, 1 INTRODUCTION Thank you for choosing XYTRONIC LF-855D Multi-Function S.M.D. Rework Station. This unit is the best tool for repairing work, combination with XYTRONIC LF-3000 and LF-852D which is specially designed for lead free soldering/desoldering, surface mount devices with te…

3, 2 amount of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter the station. Never use any solvent to clean the case. 9. This unit is designed for soldering/desoldering, hot air SMD rework and should not be used for any other purpose without f…

11, 10 For example: F-0 → F-1 → F-2 ↑ ↓ ← ← ← 3. Password Setting: When the LED displays “F-1” and flashes, press “SET” key one time and the unit enters th…

15, 14 Suitable for desoldering of SMD components such as SOIC, CHIP, QFP, PLCC, BGA etc. QFP De-soldering 1. Melt the solder: Hold the iron so that the nozzle is located directly over, but not touching the IC and allow the hot air to melt the solder. Be careful not to touch the leads …