Wintec 45V Operation & User’s Manual

13, Wintec 45V 22 Safety information 1. Self-replacing or re-structuring of any parts by is legally not permitted or will lose license 2. Use is prohibited at restricted environment declared by authority,during flight, highly- explosive area like near mining areas 3. Avoid storing in h…

11, 18 19 01=67.0Hz 02=71.9Hz 03=74.4Hz 04=77.0Hz 05=79.7Hz 06=82.5Hz 07=85.4Hz 08=88.5Hz 09=91.5Hz 10=94.8Hz 11=97.4Hz 12=100.0Hz 13=103.5Hz 14=107.2Hz 15=110.9Hz 16=114.8Hz 17=118.8Hz 18=123.0Hz 19=127.3Hz 20=131.8Hz 21=136.5Hz 22=141.3Hz 23=146.2Hz 24=151.4Hz 25=156.7Hz 26=162.2Hz 27…

12, 20 21 Specification Optional Accessories ANT AL80 M/L antenna LP-84M Belt clip PB AL01 Leather case WI AL01 Interface cable for programming LP-83A Clip microphone earphone with LED indicator LP-83B Clip microphone earphone with LED indicator LP-82A Spea…

7, 11 10 4.VOX's sensitivity: Under manu item 4, VOX's sensitivity can be selected L1~L8 levels. L8 is the least sensitive (Refer to 12). ※This function will be unworkable when 3 turns OFF. 5.REV/ TX/RX frequency: When the mode is on, R…

9, 1514 15.Attention for reapter mode Please attend to the following points while operating this function. 1. ( 10) select "+" or "-" 2. ( 13)select the discrepancy of span by 0.6MHz or select any of settings but it will be invalid if …

8, 12 13 ※Please refer to 15 repeater function for more details. 14.Wide/ Narrow band transmission and receiving setting: The radio can operate the transmission or receiving both 5KHz in wide band and 2.5Khz in narrow band. frequency of…