Shibaura SX21 Operator's Manual

95, SECTION 4 – SXM54, SXM60 MOWER DECK 4-16 MOWER TRANSPORT LOCK The tractor is equipped with a transport lock feature, allowing the mower deck to be placed in the raised position and locked, while the 3PT hitch remains fully functional. To engage the transport lock …

119, SECTION 5 – SPECIFICATIONS 5-6 GENERAL DIMENSIONS Model SX21 Hydrostatic Model SX24 Hydrostatic (1) – LENGTH, Overall: STD 4WD (Less 3-pt hitch and tires, to end of drawbar) 2085 mm 2085 mm STD 4WD (With 3-pt hitch in Horiz…

25, Shibaura SX21 SECTION 2 – OPERATION 2-6 STARTING THE ENGINE The key switch ① allows activation of the starter motor and fuel delivery only when: 1. The PTO clutch lever ② is in the "disengaged" position. …

87, SECTION 4 – SXM54, SXM60 MOWER DECK 4-8 UNEVEN TERRAIN Pre-plan mowing over uneven terrain so the grass will be dry, minimizing wheel slippage and spinning, which will damage the turf. WARNING To avoid loss of control, and to prevent overturning the tr…

88, SECTION 4 – SXM54, SXM60 MOWER DECK 4-9 TRACTOR PREPARATION 1. Install the left rear link ① on the left side of the tractor. 2. Install the pin ② through the frame and rear link. Secure pin with the M8×1.25×20 bolt ③. 3. Plac…

105, SECTION 4 – SXM54, SXM60 MOWER DECK 4-26 Blade Installation 1. Place the new or sharpened and balanced blades on the spindles with the curved edge (sail) part of the blade facing "up" towards the underside of the deck. NOTE: Rotate the …