Woodfire EVO 20 Operation And Installation Manual

8, 2.4 Connection of the heating system Installations should always be carried out by a competent person. Please ensure that the heating system is thoroughly cleansed before connecting the boiler. Failure to do so could invalidate the warranty. NEVER operate the burner without connection to the …

16, Woodfire EVO 20 In order to obtain uniform heating the combustion air should be provided continuously through the regulator. Continuous air supply from outside must be ensured especially in case of small airspace and doors/windows of airtight closing. Remove ashes from previous usage. Dispose of h…

10, competent company. The pipe pressure of the connected cold water has to be at least 2 bar and may not exceed 4.5 bar. Ensure a minimum passage of 20 l/min. A water filter needs to be installed in front of the valve intake in accordance with EN 13443. The sensing element of the thermal safety valve m…

6, 1.5 Common Details Max operating pressure 1.5 bar Fuel Wood Flue gas temperature at nominal output 230°C Required flue draft 10.0 – 15.0 Pa Constructional hearth required Yes Testing standard EN 303-5:1999 Table 3 2 Installation, chamber clearances and hearth The stove MUST be in…

15, Do not place or hang any combustible material, such as towels or clothing, on the hearth or above the appliance. Ensure that any combustible items, such as soft furnishings, curtains, furniture, pictures, calendars, posters and ornaments, are at a minimum 1,000mm safe distance from the a…