ZALMAN CNPS11X Performa+ Operation & User’s Manual

5, 5 .COM The holes in the Clip (as shown below) are matched to the “keys” on the heatpipe cover for secure Clip installation. The holes in the Clip (as shown below) are matched to the “keys” on the heatpipe cover for secure Clip installation. Insert Insert Key Key S…

7, 7 .COM Socket 775 Installation Peel o the Loading Block cover and attach it to the Backplate with the sticky side facing the center of the Backplate. Peel o one side of the Double-sided Tape and attach it with the sticky side facing the Loading block. Then, peel o the top cover. D…

10, 10 .COM Take note of the orientation of the Nuts and the Side Caps. Caution X O Peel o the Loading Block cover and attach it to the Backplate with the sticky side facing the center of the Backplate. Peel o one side of the Double-sided Tape and attach it with the sticky side f…

6, ZALMAN CNPS11X Performa+ 6 .COM 1 2 Install the Bolts to the Backplate according to the socket type and secure them with Side Caps. ※ Backplate is not needed for LGA 2011 V3 / 2011 sockets. Socket 775 Socket 115X Socket 1366 Socket 1366 / 115X Installation Peel o one side of the Double-sided Tape and attach it to…

12, 12 .COM M/B Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header. Please make sure that PWM Control Mode is activated in the motherboard’s BIOS settings. Caution Latch the Fan Fixing Clips to the notches located on the sides of the heatsink. Note: It is often eas…