ZETRON 748 Technical Manual

108, Programming 94 025-9368H Here is a typical example of a Home system user (radio). His ANI is fully defined (no wild markers). As you can see from his ANI, he is on Site 1040 and has a Radio ID of 025. Phone-to-mobile and Mobile-to-Mobile are enabled privileges. Call detail logging has also be …

187, Feature Set Reference 025-9368H 173 System Memory Test This command will execute a non-destructive memory test on all RAM (random access memory) installed in the Model 748. The Model 748 is capable of holding up to 128 k-bytes (16 banks) of non volatile memory with the Call Detail option i…

71, Programming 025-9368H 57 TYPICAL CONNECTION TO A COMPUTER OR VIDEO TERMINAL Table 4. Zetron Configuration M748 DB-9 PIN FUNCTION CONNECTION TERMINAL PC DB-25 TERMINAL AT DB-9 3 Tx data To terminal “Rx data” 3 2 4 Rx data From terminal “Tx data” 2 3 5 Ground Ground 7 5 n/a No con…

194, Feature Set Reference 180 025-9368H Voice Prompts The Voice prompts option (950-9588) adds the ability to replace several prompt beeps or tones with owner recordable Voice prompts. These are used to give instructions or prompts to callers on how to use the interconnect. There are nine slots…

165, ZETRON 748 Feature Set Reference 025-9368H 151 Pager Talk Time When making a call to a “Tone/Voice” pager, the Model 748 will send the paging tones over the channel to unsquelch the pager. The Model 748 will send a single beep or Voice prompt #6 to the telephone caller indicating that he …

257, Specifications 025-9368H 243 RADIO INTERFACE SPECIFICATIONS PTT FET pull to ground. COR Dual time constant noise detector or voltage change. CTCSS/DCS output -40 to +6 dBm. Hi/Lo selector. 600 ohm output. Tx audio -40 to +6 dBm. Hi/Lo selector. 1K ohm output. Rx audio -40 to +10 dBm. Hi/…