Zip InLine ES3 Manual, Installation, Maintenance And User Instructions

3, ES3, ES4 & ES6 Instructions. V1.06 Page 1 August / 2014 Please read these instructions carefully before commencing installation of the InLine Electronic Instantaneous Water Heater. Please leave these instructions with the end user after installation. To ensure you have the latest revision …

16, ES3, ES4 & ES6 Instructions. V1.06 Page 14 August / 2014 Fault nding Repairs should only be carried out by competent persons familiar with electric instantaneous water heaters. All service work should be performed by an authorized Zip service engineer – for details of the full …

1, ZIP InLine Electronic Instantaneous Water Heaters Models: ES3, ES4 & ES6 Installation, Maintenance and User Instructions Please read these instructions carefully before commencing installation of the InLine water heater. Please leave these instructions with the end user after installati…

11, ES3, ES4 & ES6 Instructions. V1.06 Page 9 August / 2014 Seal Seal Hot Water Connection (outlet) Filter Cold Water Connection (inlet) Fig. 3 Plumbing connection (Fig. 3) 1. The cold water inlet (blue) and hot water outlet (red) are marked on the rating plate. Connect the a…

5, Zip InLine ES3 ES3, ES4 & ES6 Instructions. V1.06 Page 3 August / 2014 Safety Information WARNING • Installation, commissioning and maintenance of this appliance must only be carried out by a competent installer who will then be responsible for adhering to all relevant standards and re…

10, ES3, ES4 & ES6 Instructions. V1.06 Page 8 August / 2014 Fig. 2 Installing the appliance 1. Secure the wall bracket to the wall with screws and wall plugs supplied (Fig. 1). 2. Place the appliance on the wall bracket and snap into position (Fig. 2). Note! This appliance i…