Utax CDC 1930 Operation & User’s Manual

223, Utax CDC 1930 Sending Functions 6-3 6 Use the procedure below to select the original size when sending scanned images. 1 Press the Send key. 2 Place the originals on the platen. 3 Press [Org./Sending Data Format] and then [Original Size]. 4 Press [Standard Sizes 1], [Standard Sizes 2], [Others]…

478, Troubleshooting 12-2 Solving Malfunctions The table below provides general guidelines for problem solving. If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following pages. If the problem persists, contact your Service Rep…

46, Part Names 1-6 26 Paper Length Guide 27 (Paper Width Guide) Lock 28 Inner Tray 29 Paper stopper 30 USB Port (A1) 31 Right Cover 1 Lever 32 Right Cover 1 33 Main Power Switch 34 Paper Width Adjusting Tab 35 Handle 36 Right Cover 2 Lever 37 Right Cover 2 38 Paper Width Guide 39 Support Tray Sectio…

564, Appendix-28 Large Capacity Feeder (1,500-sheet x 2) (Option) Side Feeder (500-sheet x 3) (Option) Large Capacity Side Feeder (500, 1,500-sheet x 2) (Option) Item Description Paper Supply Method Feed & reverse roller method (No. Sheets: 3,000 (80 g/m 2 )/No. Sheets: 3,500 (64 g/ m 2 )) Pape…

155, Basic Operation 3-61 3 Using Weekly Timer "Weekly Timer" is installed on the machine as a standard application. Weekly Timer allows you to store machine on/off times for each day of the week and set the machine to automatically turn on and off at those times. IMPORTANT: …

58, Preparation before Use 2-12 Setting Date and Time Follow the steps below to set the local date and time at the place of installation. When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of the E-mail message. Set the date, …