Q-See QC Series Operation & User’s Manual

24, 46 47 PICTURE 2-59 STEP 3. Once the camera has opened. Click on the Network tab on the left and then on the TCP/IP option. STEP 4. Enter the DNS number STEP 5. Click Save. 2.6 DYNAMIC DOMAIN NAME SERVICE (DDNS) This is an optional step which allows you to take advantage of Dynamic Domain Na…

44, 86 87 Alarm Push: This window provides you a check list allowing you to indicate which cameras will alert you based on motion detection, camera masking, or a local alarm triggered at the DVR itself. When Alarm Push is activated, you will receive alerts on your mobile device even when yo…

11, 20 21 PICTURE 2-6 PICTURE 2-7 REMOTE DEVICE Filter None IP Search Manual Add Add Cancel 2 IP Address Port Device ID Manufacturer Type 1 10.1.1.65 1 YZC2OC061966 Private IPC-HFW210 2 10.1.1.67 2 YZCAU192012 Private IPC-HFW321 2.2 ADDING AND REMOVING CAMERAS IN YOUR SYSTEM LOCA…

29, 56 57 PICTURE 3-13 Click on the Setup button next to Area to turn off motion detection in certain areas, such as roads, a flag or trees that move in the wind to avoid false alarms. Clicking on a square in the grid, or clicking and dragging across multiple areas will remove the blue ma…

28, 54 55 SMTP (E-MAIL) The camera can send out its own e-mail alerts - with snapshot attachments. If the camera is connected remotely to an NVR, these e-mails will be in addition to those that the NVR creates. The camera’s e-mail address should therefore be different than that used for the N…

16, Q-See QC Series 30 31 2.4 TROUBLESHOOTING NETWORK CONNECTIONS OPENING PORTS The most common factor causing network connection issues is for communication between the device and a device outside the network to be blocked. The router’s built-in-firewall is designed to keep malicious users and software out o…