SI 3 series Instructions Manual

9, SMALL TUBE 3 1/4’’ (8.26cm) 03312017SR 9 SMALL TUBE 1 2 3 REMOVE MOTOR IF REPLACING A SCREEN Slide the motor out to get access to the retaining screws. Remove and set aside the retaining screws, then completely remove the motor. …

12, SMALL TUBE 3 1/4’’ (8.26cm) 12 INSTALL MOTOR 1 2 3 Align Key Slide the motor partially into the tube and secure the black plastic piece on the motor to the tube with the phillips head screws. Then push the motor all the way into the tube making sure to align the key on the motor with the k…

20, 20 1 RECONNECT POWER AND CONTROLS Plug in the motor control, power, and grounding wires making sure all cables are routed away from the moving tube. …

14, SI 3 series 4 1/2’’ (11.43 cm) LARGE TUBE 14 1 1 REMOVE MOTOR IF REPLACING A SCREEN REMOVE IDLER IF REPLACING A SCREEN LARGE TUBE Pull the motor assembly completely out of the tube. Pull the idler assembly completely out of the tube. …

15, 4 1/2’’ (11.43 cm) LARGE TUBE 03312017SR 15 1 UNPACK REPLACEMENT SCREEN 2 WEAR GLOVES WHEN HANDLING SCREEN MATERIAL. Open the fanfold box and discard the foam. Then remove the straps and screws from the wieght bar cradles. Then remove the screws from the shipping end plates. …