Yoder Smokers YS 480 Assembly Instructions Manual

10, 10yodersmokers.com Step #8 Part G - Qty 2 Parts Required: FIG 13 FIG 14 FIG 15 FIG 16 Part A4 - Qty 4 Part A5 - Qty 4 Using two of each A4 & A5, attach one part G to the stand assembly using only the bottom holes in stand assembly. Install part G with diagonal corners on top, as shown belo…

12, 12yodersmokers.com Step #10 Locate chamber legs on Pellet Cooker. FIG 21 Pick up stand assembly (large wheels should be down), and carefully guide stand onto chamber legs. FIG 22 FIG 21 FIG 22 CHAMBER LEGS …

14, 14yodersmokers.com Step #12 Conrm that the stand is fully assembled and all fasteners are tightened. Using a box cutter or utility knife, CAREFULLY cut along top edges of box (dashed lines) as shown. FIG 25 Once both cuts are made, fold the ap over the end of the box. FIG 26 FIG 25 FIG 26 …

11, 11 yodersmokers.com Step #9 Part H - Qty 2 Parts Required: FIG 17 FIG 18 H FIG 19 FIG 20 Part A4 - Qty 4 Part A5 - Qty 4 Using two of each A4 & A5, attach one part H to the stand assembly using only the bottom holes in stand assembly as shown. Install part H with diagonal corners on top…

5, 5 yodersmokers.com PART ID DESCRIPTION ILLUSTRATION QTY C W90783 LEG 1 D W90785 LEG 1 E A91726 CASTER LEG 2 F 24252 WHEEL 2 Step #3 Locate and open box 1. Gather parts A (Hardware Package - Qty. 1), B (Bottom Shelf - Qty. 1), G (Yoder Logo Skirt – Qty. 2), and H (Long Skirt – Q…