Shoe Systems Plus Supreme S-750 Operator's Manual

17, OTHER MOTORS To remove the motor, these procedures should be followed: 1. Disconnect the electrical power supply. 2. From the rear of the machine, remove the four (4) screws, nuts, and washers holding the motor. Remove V-belt. 3. Disconnect the electrical wiring b…

1, SUPREME S-750 FINISHER Operator Manual SHOE SYSTEMS PLUS, INC. 249 W. MAIN ST GOSHEN, NY 10924 800-354-6278 WWW.SHOESYSTEMSPLUS.COM 1 …

18, ACCESSORIES FOR SUPREME S-750 7" PNEUMATIC CONTOUR SANDER (A-24) 8" X 2" YARN BRUSH (A-2) 8" HORSE HAIR WITH LEATHER BURNISHER (A-3) 8" X 2" HORSE HAIR BRUSH BLACK OR BROWN (A-4) 5" WIRE BRUSH (A-5) 5" X 2" GRINDING STONE (A-6) FLAT WHEEL 3&q…

10, Shoe Systems Plus Supreme S-750 ACCESSORIES WARNING : Eye protection should always be worn by the operator and others in the work area when using the accessories supplied with the Supreme Finisher. Eye protection is required for protection from flying debris and dust, which could cause eye injury. 1 3/8” KE…

8, SHARPENING CUTTERS WARNING : Eye protection should always be worn by the operator and others in the work area when sharpening cutters. Eye protection is required for protection from flying debris and dust, which could cause eye injury. Sharpen dull cutters as soon as dullness is note…