Yealink SIP-T48S Operation & User’s Manual

99, Call Features 95 Topics Recording a Call Managing a Call While Recording Pausing a Recording Pausing a Recording Resuming a Recording Resuming a Recording Stopping a Recording Playing a Recorded Call Pausing/Resuming a Recording Fast Forwarding/Rewinding a Played Recorded Call Stopping a Pl…

61, Directory 57 l Specify a contact photo to the contact (only available on the SIP-T48S/T48G/T46S/T46GIP phone). Procedure 1. Press Directory (Dir) or navigate to Menu->Directory->Local Directory to enter the local directory. On the SIP-T48S/T48G IP phone, tap Directory or navigate to M…

115, Advanced Features 111 Setting a Retrieve Key You can set a line key as a Retrieve key, and specify a parked extension or retrieve lot you want to retrieve a parked call from for this key. Before You Begin Check with your system administrator if the FAC or Transfer mode is set on your phone. Chec…

134, Yealink SIP-T48S Yealink T4 Series IP Phones User Guide 130 You can also listen to your voice mails after the voice mail pop-up message box disappears. Before You Begin You need to set the voice mail code in advance. Procedure 1. Navigate to Menu->Message->VoiceMail->View Voice Mail. The LCD scre…

140, Yealink T4 Series IP Phones User Guide 136 For more information on Bluetooth USB dongle BT40, see the user guide on the Bluetooth USB dongle BT40’s sup- port page on Yealink Technical Support. Activating the Bluetooth Mode When you insert Bluetooth USB dongle BT40 into the USB port on …

143, Optional Accessories with Your Phone 139 Make sure that the Bluetooth-Enabled mobile phone is paired and connected to your IP phone. Procedure 1. Navigate to Menu->Basic->Bluetooth->Paired Bluetooth Device. On the SIP-T48S/T48G IP phone, navigate to Menu->Basic->Bluet…