Shinano Kenshi PTP 1 Operation & User’s Manual

39, 40 10. Setting up your PLEXTALK. There are several features of PLEXTALK which it are useful to set up before starting to use it. These can be done at any time but it is sensible to do them sooner rather than later. This chapter details how to set the internal clock and how to selec…

98, 99 17.5. Getting recording information. In any of the 3 recording states, you can get information about the current status of the recording as follows: In recording stand by, press and hold down the Number 5 key. PLEXTALK will say "Level monitor" followed by the available record…

82, 83 16.7.1. Connecting a microphone or line in source. PLEXTALK will default to using the built in microphone if no other source is connected, therefore, to use this microphone, you do not need to take any specific action. When making live recordings of voices, conferences, lec…

146, Shinano Kenshi PTP 1 147 Troubleshooting when using PLEXTALK as a CD-R or CD-RW Drive. Symptom: Drive does not work. Possible cause 1: The USB cable is not connected correctly. Solution: Reinsert the USB cable. Check the cable, the connector and whether the pins are dented, bent or damaged. Possible …

105, 106 SD card to external USB storage, you can backup variety of data vice versa except CD/DVD drive as source only. In the back up process PLEXTALK gives a verbal warning if there is insufficient space available If you backup from Music CD via external USB CD/DVD drive,…

67, 68 14. Playing Audio Files in media. This chapter looks at issues relating to playing Audio Files in SD card or USB. In this guide, the term "audio files" refers to files that have been created using a PC or IC recorder. As previously mentioned, PLEXTALK is capab…