Sharp LC-32CFG6241KF Quick Start Manual

2.  Using the RF cable supplied, connect the TV to the 
TV Aerial wall socket. Connect the power cable to 
the electrical outlet.
3.  The TV should power on automatically once the TV 
is connected to the mains. In the event this does 
not happen, please refer to the ‘Pairing the remote 
control’ section of the QSG.
4.  Insert the batteries supplied into the remote 
control. The remote control should automatically 
be paired with the TV set. If this is not the case, 
please refer to the ‘Pairing the remote control’ 
section of the QSG. 
6.  If the TV  nds some, but not all of the channels you would expect to receive, the signal 
being received by the TV is inadequate. In most circumstances this can be corrected with 
the simple addition of a Signal Booster between the TV and the TV aerial wall socket, as 
shown. Once the signal booster is connected, retune the TV in order to receive all of the 
channels.
5.  You will be welcomed with the  rst time installation screen. Select your 
chosen options and press OK on the remote control and tuning will begin.
1.  ( g.1) Place the TV set on a   at and clean surface with the panel facing downwards to avoid damage, then  x the stand/feet shown. The feet are marked L (left) and R (right). ( g.2) When the stand feet are installed correctly, the 
stand/feet will be angled away from each other at the front of the TV set. ( g.3) Secure the stand/feet to the underside of the TV set using the 4 screws provided. 
QUICK START GUIDE
Quick Start Set Up Guide. For full instructions please refer to the user guide (available to download from the website).
Hotline: UK. 0330 024 0803 ROI. 01443 3940 | Internet: www.umc-uk.co.uk
Model Number: LC-32CFG6241KF, LC-32CFG6242KF, LC-32CHG6241KF, LC-32CHG6242KF, LC-40CFG6241KF, LC-40CFG6242KF, LC-43CFG6241KF, LC-43CFG6242KF, 
LC-49CFG6241KF, LC-49CFG6242KF, LC-55CFG6241KF, LC-55CFG6242KF
 
UK: Calls are charged at your normal telephone call rate.  ROI: Calls are charged at a local rate.
SHA/QSG/0073
Standby Button
Used for attaching the stand
to the TV set ( g.2)
4 x
For stand/feet installation, there is one type of screw
provided as shown below.  
To complete the stand installation you will require a 
cross head screw driver.
Place the TV set on a   at and clean surface with the 
panel facing downwards to avoid damage.
L
R
1
TV panel must be facing downwards.
4 x
3
4
1
2
L
R
3
TV panel must be facing downwards.
2
TV panel must be facing downwards.
To receive Freeview channels, in particular Freeview HD channels, 
you will need a Digital TV aerial and be in a good Freeview 
coverage area. You can check coverage for your postcode 
at www.freeview.co.uk.
Please note that any Freeview HD channels found during tuning 
will be placed in channel positions above 100. 
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
Pairing the remote control
1) If the TV turns on automatically and the  rst time installation 
screen appears but the TV does not react to remote control, press 
and hold the centre two coloured buttons at the bottom
of the remote control for a few seconds. The power light will blink 5 
times to con rm the TV and remote control are paired. 
2) If the TV does not automatically turn on you will need to turn 
the TV on using the standby button on the TV set (not the remote 
control), once switched on, press the standby button on the TV set 
once, this will prompt the ‘pairing menu’ to appear, scroll through 
and highlight ‘Pair your remote’ by pressing the CH+/CH- TV button 
(scroll up/down function in the menu) then press the TV set’s 
standby button (OK function in the menu) to con rm your selec-
tion, then with the remote control, press and hold the centre two 
coloured buttons at the bottom of the remote control a few seconds, 
the power light will blink 5 times to con rm the TV and remote 
control are paired. 
GOTO                      A-B                          ANGLE
REPEAT
REC
LIST
 
 
 
 
 
 
NOTE: In Home Mode, the TV will switch itself to Standby mode after 4-5 hours in the event that 
the TV buttons or remote control buttons are not pressed. 
HOME MODE is the mode for end users, by default 
it is set to a power saving mode which reduces the 
energy used by up to 25% (by reducing the power 
to the LED/LCD panel). This can be changed in the 
picture mode settings in the TV operation menu. 
When in STORE MODE the picture is adjusted to 
a brighter setting. The shop demonstration will 
appear on the screen automatically after 2 minutes. 
Sharp - SHA-QSG-0073 - QSG - SmartTV - G6242KF series.indd   1Sharp - SHA-QSG-0073 - QSG - SmartTV - G6242KF series.indd   1 27/02/2018   14:31:3527/02/2018   14:31:35

• 
  Hardy HIPS series

  Hardy Guidance: HIPS series (#U8F8TP)

  HIPS series, 13, hardy/hips-series.pdf

• 
  Field Controls SWG-4HD

  SWG-4HD Automobile Parts - #1571E2

  SWG-4HD, 4, field-controls/swg-4hd.pdf

• 
  SMSC USB2242

  Controller Instruction #49T742

  USB2242, 23, smsc/usb2242.pdf

• 
  Init NT-SWM1B

  #QTI625: NT-SWM1B Document

  NT-SWM1B, 1, init/nt-swm1b.pdf

• 
  NEC SL1000

  Document (SL1000, #61A5O4)

  SL1000, 8, nec/sl1000.pdf

• 
  Toyota RAV4 HYBRID 2017

  Toyota Guide Automobile RAV4 HYBRID 2017 (#6PKAKT)

  RAV4 HYBRID 2017, 52, toyota/rav4-hybrid-2017.pdf

• 
  Cisco C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router

  User Guide (C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router, #64BQ8N)

  C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router, 16, cisco/c8510msr-skit-dc-catalyst-8510-multiservice-switch-router.pdf

• 
  Frigidaire FRT21P5AW0

  Refrigerator Reference Book #3L2B52

  FRT21P5AW0, 2, frigidaire/frt21p5aw0.pdf

• 
  Echo SRM-230 - PARTS CATALOG SERIAL NUMBERS 07001001-07999999

  #M1628O: SRM-230 - PARTS CATALOG SERIAL NUMBERS 07001001-07999999 User Manual

  SRM-230 - PARTS CATALOG SERIAL NUMBERS 07001001-07999999, 50, echo/srm-230-parts-catalog-serial-numbers-07001001-07999999.pdf

• 
  WELLTECH ATA-171 - V1.8

  Other ATA-171 - V1.8 Instruction, #UX5JXJ

  ATA-171 - V1.8, 50, welltech/ata-171-v1-8.pdf

• Search YouTube Videos for Sharp LC-32CFG6241KF Device
• Search Google for Sharp LC-32CFG6241KF Information
• Search Photo of Sharp LC-32CFG6241KF in Google Images
• Search Twitter for Sharp LC-32CFG6241KF News