SEWOO LK-P20II Technical Manual

7, SEWOO LK-P20II 7 2-inch Label Technical Manual B. Print command The print command terminates and prints the file. This must always be the last command (except when in Line Pint Mode). Upon execution of the Print command, the printer will exit from a control session. Be sure to …

19, 19 2-inch Label Technical Manual HEAD Transportation data format header 01[GS]98 TN Tracking Number [GS] SCAC Standard Carrier Alpha Code UPSN SHIPPER UPS Shipper Number [GS] PICKDAY Julian day of pickup [GS] SHIPID Shipment ID Number [GS] NX Package N of X (n/x) [GS]…

23, 23 2-inch Label Technical Manual F. PCX Commands The PCX command gives a user the ability to send “.PCX” graphics formatted images to the printer. The .PCX image MUST be encoded as a black and white image. Format {command} {x} {y} {data} Command & option {command}…

6, 6 2-inch Label Technical Manual 2. Printer commands A label file always begins with the “!” character followed by an “x” offset parameter, “x” and “y” axis resolutions, a label length and finally a quantity of labels to print. The line containing thes…

41, 41 2-inch Label Technical Manual 10. Printer Escape Commands A. SET AND READ CODE Command Printer command sessions normally start with the ‘!’ character. When the printer is used in Generic Text Mode (or Line-Print Mode) and if the user expects to print the ‘!” charac…

11, 11 2-inch Label Technical Manual B. FONT-GROUP(FG) Command The FG command gives a user the ability to group up to 10 pre-scaled font files into a single group. A user can later specify the font group in a TEXT command. If a font group is used in a text command, the printer will use…