Zeppelin Design Labs MACCHIATO Assembly Manual

36, 36 BUILDING THE PLASTIC CABINET KIT Zeppelin Design Labs offers a nifty black plastic cabinet kit. It is rugged, and quick and easy to assemble. WHAT YOU WILL NEED 1. X-Acto knife or other sharp hobby knife 2. Some medium and fine sandpapers (180, 240 and 320 grit, more or less) 3. Plasti…

39, 39 Press the Back into place and hold for about a minute (12). If necessary, add a small bead of glue to the inside of the joint between Back and Bottom (13). 12 13 5. Install the Front in exactly the same manner as the Back (14, 15) 14 15 6. Install the Magnets. a. Your kit…

44, Zeppelin Design Labs MACCHIATO 44 9. Assemble the Lid a. Pop the Console and Top onto the cabinet (40, 41). Looks pretty neat, huh? If needed, touch up the Console or the Sides with fine sandpaper to achieve the nicest-looking fit you can. 40 41 b. Remove the Top and carefully apply a tiny, continuous bead of glue to th…

17, 17 5. Diodes (D1,D2): Diodes are polarized: it matters which lead goes in which hole. You will notice one end of the diode body has a white stripe around it (27). It goes like this: WHITE STRIPE = SQUARE PAD NO STRIPE = ROUND PAD Gently bend the leads like you did for the resistors (27). Place b…

32, 32 h. Remove the binder clips; remove the last of the backing (32); stick the label onto the cabinet (33). If your cardstock has a textured surface, you may need to warm the sticker with a hair dryer and burnish it down thoroughly. 32 33 11. Cut out the label holes. a. Cutting throu…

2, 2 MACCHIATO MINI-SYNTH DIGITAL SYNTHESIZER Assembly Manual © 2017 ZEPPELIN DESIGN LABS. NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT WRITTEN PERMISSION FROM THE AUTHOR. ZEPPELIN DESIGN LABS TAKES NO RESPONSIBILITY FOR ANY DAMAGE OR HARM THAT MAY COME TO ANYONE OR ANYTHING THROUGH TH…