World Tech Toys Orion Instruction Manual

2, DRONE DIAGRAM Rear Rotor Blades Front Rotor Blades LED Lights Landing Skid Vibration Absorbing Board Battery Bay 1 Axis Motorized Picture/Video Camera INTRODUCTION SAFETY & PRECAUTIONS Thank you for purchasing this amazing World Tech Toys product. This drone is suitable for outdoor f…

15, 15 TROUBLESHOOTING PROBLEM CAUSE SOLUTION Drone is unresponsive. The Transmitter light keeps flashing. Drone is synced to the remote but the rotors won’t start spinning. Drone is unresponsive. Transmitter light is ON. Drone is unresponsive. Drone’s rotors spins but doesn�…

11, SPEED CONTROL The drone has 3 speed settings. Low, medium and high speed. The drone will always default to low speed when you first turn it on. Press the SPEED CONTROL button once and you will hear 2 beeps, meaning it is now on medium speed. Press the SPEED CONTROL button again and you wi…

8, World Tech Toys Orion CAMERA INDICATOR LIGHT MOTORIZED CAMERA CONTROL RECORDING VIDEO: Make sure both the remote and drone are on and you’ve gone through the syncing process first. Press the Video Record button to start recording video, you should hear a single beep from the remote. Press the bu…

6, INSTALLING THE LANDING SKIDS A B The drone comes with 2 landing skids that will need to be installed. Landing Skid A and B. Landing Skid A will go into slot A on the bottom of the drone and Landing Skid B will go into slot B on the bottom of the drone, as shown above. Line up the Landing Skid wit…

12, RETURN ASSIST RETURN ASSIST does not use GPS to fly back to the pilot. The RETURN ASSIST function only remembers the general direction the drone took off from. For RETURN ASSIST to work properly you will need to launch the drone with the front of the drone facing away from the pilot like …