Twisted Hobbys YAK Manual 

15, Twisted Hobbys YAK Rev: 2012.12.05.v004a 15 Attach the rudder using the tack up method. Line up the slit in the rudder with the mating top edge on the fuse, there will be a step on the bottom this is okay and intended Locate the sh…

10, Rev: 2012.12.05.v004a 10 Hook up all the electronics, center and test. Mount the control horns and install the quick links as shown in the outer most holes. Aileron horn is glued on as shown …

6, Rev: 2012.12.05.v004a 6 Perfect choice for building and repairing your Twisted Hobbys EPP planes! This is the only adhesive you will ever need. Welder virtually bonds anything to anything! Clear, heavy-duty, flexible and water-proof when dry. U…

11, Rev: 2012.12.05.v004a 11 On ce the glue has tacked up, bring the wing halves together, make sure the tabs are all lined up Prepare the two rectangle wing spars to be installed. It is easier to temporarily tack them t…

20, Rev: 2012.12.05.v004a 20 FINISHING TOUCHES Tuck all the wires away and clean up any glue strings that are left over from the assembly process. Double check that all the glue joints are …

14, Rev: 2012.12.05.v004a 14 View of the rudder servo full seated into it's designated area. With the aircraft upright, t he output shaft is towards the nose and the arm sticks out the left side Install the elevator servo …