WIS NETWORKS WIS-SF800P Quick Setup Manual

3, Rear Panel - A three-way power socket for 100~240V AC power input - At the left side of power socket, please get it properly grounding. VLAN Switch - By default it is disabled. All the ports is equal to each other and reachable. - If enable the VLAN, the system works with VLAN isol…

6, Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an ele…

8, Limited Warranty Wisnetworks warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of two (2) years from the date of shipment by Wisnetworks under normal use and operation. Wisnetworks sole and exclu…

5, WIS NETWORKS WIS-SF800P Install on 19’’ rack Power Up the Switch PM3008GSN 8-Port Gigabit PoE Switch PM3008GSN 8-Port Gigabit PoE Switch Bracket Screw 1. Check the rack stability and grounding 2. Mount the two bracket in the package to the two side of the switch with screws 3. Put the switch to a proper position …

2, Interface 1 Front Panel Voltage Switch Voltage Switch LED Indicator - Switch to 48V/24V/12V power output for all ports VLAN Switch LED Indicator 8*10/100Mbps RJ45 Ports OFF : Switch is power off Green Green Green Green Orange ON : Switch is power on OFF : NO device connected ON : Device co…